Product information
| Type of mixture | Blīvēšanas |
|---|---|
| Application of the substance/mixture | Apdares darbiem |
| Product weight with packaging | 5 kg |
| Working temperature | +10 - +20 °C |
| Product type | Tepe |
| Brand | Knauf |
| Model | Uniflott |
| Mixture to water ratio | 2,5 kg : 1,2 l |
| Consumption | 0,25 kg/m² |
| Usage | Ģipškartona plākšņu šuvēm, perforētām akustisko ģipškartona plākšņu šuvēm (SK un FF), drywall šuvēm (Knauf Brio / Knauf Brown). |
| Composition of the mixture | skat. uz iepakojuma |
| Country of origin | Vācija |
| Barcode | 500976452 |
Very high-quality, specially durable gypsum putty intended for filling joints of drywall and gypsum fiber boards. Made from a special gypsum enhanced with polymers. Suitable for hand application.
Knauf Uniflott putty - 5 kg
- Delivery quantity: 5 kg bag
- low shrinkage during drying
- very high crack resistance
- intended for indoor use
- fast strength development, quick drying
- Lag.1702105
- Application area: Indoor
- Original manufacturer's text: Gypsum putty for manual filling of drywall systems
- Original manufacturer's text (2): Knauf Uniflott is a powder-based filler that is made from a special gypsum base, modified with plastic, and tailored for additive applications.
- Product type: putty
- Filler construction: Powder filler
- Volume (kg): 5
- Material of putty knife: gypsum
- Surface quality: Q 2
- Fast hardening: No
- Consumption per mm layer thickness (kg): 0.1
- Putty knife application: filling, embedding
- Consumption per mm layer thickness up to (kg): 1.2
- Filler type: filler
- Filler application area: ceilings, walls
Instructions for use:
Pour Uniflott into clean, cold water until the surface is nearly below the water line (max. 5 kg approximately 2.4 l of water). Then mix with a putty knife to a homogeneous mass without any other additives.
Unperforated drywall boards: depending on the desired surface quality, apply two coats. Completely fill the joints with the first coat. With the second coat, use a putty knife or wide putty knife to create a smooth transition to the board surface. Also fill the fastening elements. After complete drying, sand with sanding mesh. Recommendation: reinforce cut edges with joints using joint tape.
After use, wash equipment and tools with water.
Reviews
There are no reviews yet. Be the first!
More from Knauf
Write a review
Write a review for: PUTTY FOR JOINTS KNAUF UNIFLOTT 5KG