IMPREGN. KOKAM SHADE OREG-PINE 5L OKKO

Name: IMPREGN. KOKAM SHADE OREG-PINE 5L OKKO
Brand: Buvmix
SKU: 501764210
Price: 11.01 EUR
Availability: InStock

Product code: 501764210

€11,⁰¹

Pieejams uzreiz

Write a review More about the product

Product information

Manufacturer	OKKO [EN]
For finishing works	Iekštelpu un āra
Package quantity, l	5
Color	Oranža krās.
Product type	Koksnes impregnants
Brand	Okko
Collection	Wood Shade
Diluent	Ūdens
Color name	Oregona priedes krās.
Consumption	14-18 m²/l
Features	Virsmai jābūt sausai un tīrai. Rūpīgi notīriet putekļus, netīrumus, taukus vai citus traipus. Pirms lietošanas labi samaisa. Ieteicams uzklāt ar otu vai rullīti 1-2 reizes, neatstājot nesegtu koksni. Otro slāni uzklāj tikai pēc tam, kad pirmais ir pilnībā izžuvis. Impregnētai koksnei jābūt sausai (mitrums - mazāks par 15%).
Usage	Koka virsmu impregnēšanai, piešķirot tām vēlamo krāsu, dekoratīvo izskatu un aizsardzību pret laikapstākļu iedarbību. Sastāvā esošais vasks un citas piedevas novērš ūdens uzsūkšanos, padara koksni izturīgu pret saules stariem un aptur koksnes dabisko novecošanos un pūšanu.
Completely dry after	12 - 24 h
Drying time (before touch)	2 h
Country of origin	Lietuva
Barcode	501764210

Wood impregnation agent "Wood Shade" is intended for decorating and protecting wood from the effects of the atmosphere. Thanks to the wax and other additives in the composition, the wood does not absorb water, becomes resistant to sunlight, the aging and decay of natural wood
is stopped.

Purpose

For impregnation of wooden surfaces (for example, fences, firewood storages, decorative wells, environmental decoration elements, outdoor canopies, etc.) by giving the desired color. When using outdoor furniture, it is recommended to cover the horizontal surfaces with varnish. It is recommended to impregnate new surfaces until the wood has darkened due to the effects of the atmosphere. Surface preparation. The surface must be dry and clean. Dust, resin, grease or other stains must be thoroughly cleaned. Usage. Mix well before use. It is recommended to apply with a brush or roller 1-2 times, leaving no raw wood. The second layer should be applied only after the first layer has completely dried.

Working conditions

Use when the ambient temperature is between +6 and +25 °C. The recommended working temperature is 18 (+-5 °C). Impregnated wood must be dry (moisture – less than 15 percent). Impregnation quality is adversely affected by high air humidity.
Drying time. Do not press after 2 hours (at an air temperature of +20 °C and a relative humidity of 65 percent). Dries completely after 12-24 hours. The outcome. Approximately 14-18 m2/l (depending on wood surface preparation).